H05VVH6-F 케이블

 

The scope of application

체계

This cable is suitable for the power line with AC 50Hz and rated voltage is 300/500V.

신청

It is used for outdoor medium-sized mobile electrical equipment and tools.

Features

This cable has the characteristics of softness, and has certain weather resistance and certain oil resistance, it also can be used outdoors.

Required Standard

Carried Standard

제이비/티 8735-2011, the rubber insulated flexible wires and flexible cables with rated voltage of 450/750V and below.

Additional Standard

Operating characteristics

정격 볼륨tage

The rated voltage is 0.3/0.5kV, and the maximum voltage of the AC system should not exceed 0.6kV.

Operating Temperature

The maximum allowable long-term operating temperature of the cable conductor is 60℃.

Environment Temperature

The minimum environment temperature which the cable can work properly is -10 ℃.

Laying Temperature

The laying temperature of the cable should not be lower than -10℃.

Bending Radius

Recommended minimum bending radius: The bending radius of the cable should not exceed 10D.

Product Marking

GUOWANG CABLE GROUP

Core of Cable

Color marking 2-core cable: no preference for chromatography; 3-코어 케이블: 그린/옐로우, 라이트 블루, 갈색 또는 밝은 파란색, 검정, 갈색; 4-코어 케이블: 그린/옐로우, 라이트 블루, 검정, 갈색 또는 밝은 파란색, 검정, 갈색, 검정 또는 갈색; 5-코어 케이블: 그린/옐로우, 라이트 블루, 검정, 갈색, 검정 또는 갈색, 또는 라이트 블루, 검정, 갈색, 검정 또는 갈색, 검정 또는 갈색.

외피

케이블의 외피는 일반적으로 검은색입니다, but a color other than black can also be used in accordance with the manufacturer or buyer’s agreement to adapt to the environment. The cable shall have continuous identification of the manufacturer’s name, 제품 모델 및 정격 전압, and the manufacturer’s name identification may be repeated identification of the manufacturer or trademark; 한 완전한 마크의 끝과 다음 마크의 시작 사이의 거리입니다: it shall not exceed 550mm on the outer sheath of the cable; The cable insulation or belt should not exceed 275mm; The printed logo should be erasable and not easy to fall off, and the printed content on the surface should be clearly recognizable. 메모: The logo on the surface of the sheath can also add other content according to the custom of the user or the manufacturer.

납품과 포용력

납품 길이

Each loop of cable should be 100m in length, and the length of the cable drum should be greater than 100m. Delivery of any length of cable may be permitted by mutual agreement.

Error In Length

The measurement error of delivery length is ±0.5%.

포장, Transport and Storage

포장

Cables in rolls and coils should be neatly wound and properly packed; The cable tray shall comply with the provisions of JB/T8137-1999; 케이블 끝은 단단히 밀봉되어야 합니다, and the cable ends extending out of the disk should be covered with a protective cover, the length of the cable ends extending out of the disk should be less than 300mm. It should be labeled with a content on the package of the cable: manufacturer name, 모델, 사양, 정격 전압, 길이, 질, 제조 날짜, 표준 번호 또는 인증 마크, 케이블 트레이의 올바른 회전 방향, 등.

Transport

Transport is generally in the form of vehicles and ships, and the cable must be firmly fixed during transport to avoid bumping or tipping over to cause damage to the cable or drum. Do not lay the cable tray flat; It is strictly forbidden to drop the cable tray containing the cable from a height during transportation.

보관

완성된 케이블은 온도가 사이인 환경에 보관해야 합니다. 5 and 35℃and the humidity is below 80%, 햇빛이나 비에 직접 노출되지 않도록, and should be properly ventilated to keep the environment dry.

Ordering Instruction

The model, 사양, 길이, 납품 날짜, packing method and other necessary information of the cable should be correctly marked when ordering.

설치 공지

설치 중, the operating temperature should not be lower than -10℃. If the ambient temperature measured by the thermometer is lower than 0℃, 설치를 준비하기 전에 케이블을 예열하십시오.. The bending radius of the multi-core cable should not exceed 10D (D는 케이블의 외경입니다.) to avoid mechanical damage inside the cable.

 

SPECIFICATION	CONDUCTOR STRUCTURE	OUTER DIAMETER OF CONDUCTOR (밀리미터)	벨트 (밀리미터)	INSULATION THICKNESS(밀리미터)	SHEATH THICKNESS (밀리미터)	OUTSIDE DIAMETER (밀리미터)	WEIGHT (킬로그램/km)	MAXIMUM DC RESISTANCE AT 20℃ (Ω/km)	TESTING VOLATAGE (KV/min)	MAXIMUM ALLOWABLE TRACTIVE FORCE (N)
YZB/YZWB	2×0.75	24/0.20	1.12	8×0.05	0.6	0.8	4.1×6.6	45.5	26	2/5	105
	2×1.0	32/0.20	1.29	5×0.05 /8×0.05	0.6	0.9	4.4×7.0	54.8	19.5	2/5	140
	2×1.5	30/0.25	1.56	8×0.05	0.8	1	5.4×8.6	80.5	13.3	2/5	210
	2×2.5	49/0.25	2	8×0.05	0.9	1.1	6.2×10.2	116	7.98	2/5	350
	2×4	56/0.30	2.56	8×0.05	1.0	1.2	7.1×11.8	166.3	4.95	2/5	560
	2×6	84/0.30	3.54	10×0.05	1.0	1.3	8.2×13.8	225.4	3.3	2/5	840
	3×0.75	24/0.20	1.12	8×0.05	0.6	0.9	4.3×6.8	60.2	26	2/5	158
	3×1.0	32/0.20	1.29	8×0.05	0.6	0.9	4.4×7.0	69.4	19.5	2/5	210
	3×1.5	30/0.25	1.56	8×0.05	0.8	1.0	5.3×8.6	102.8	13.3	2/5	315
	3×2.5	49/0.25	2	8×0.05	0.9	1.1	6.2×10.2	150.1	7.98	2/5	525
	3×4	56/0.30	2.56	8×0.05	1.0	1.2	7.1×11.8	218.8	4.95	2/5	840
	3×6	84/0.30	3.54	10×0.05	1.0	1.3	8.2×13.8	298.4	3.3	2/5	1260
	4×0.75	24/0.20	1.12	8×0.05	0.6	0.9	4.3×6.8	72.0	26	2/5	210
	4×1.0	32/0.20	1.29	8×0.05	0.6	0.9	4.4×7.0	84.0	19.5	2/5	280
	4×1.5	30/0.25	1.56	5×0.05	0.8	1.0	5.8×9.3	137.4	13.3	2/5	420
	4×2.5	49/0.25	2	5×0.05	0.9	1.1	6.6×10.7	198.0	7.98	2/5	700
	4×4	56/0.30	2.56	5×0.05	1.0	1.2	7.6×12.5	290.1	4.95	2/5	1120
	4×6	84/0.30	3.54	10×0.05	1.0	1.3	9.2×15.5	411.8	3.3	2/5	1680
	5×0.75	24/0.20	1.12	5×0.05	0.6	1.0	4.7×7.3	92.3	26	2/5	263
	5×1.0	32/0.20	1.29	5×0.05	0.6	1.0	4.9×7.7	108.5	19.5	2/5	350
	5×1.5	30/0.25	1.56	5×0.05	0.8	1.1	5.8×9.3	160.8	13.3	2/5	525
	5×2.5	49/0.25	2	5×0.05	0.9	1.3	6.8×10.9	238.3	7.98	2/5	875
	5×4	56/0.30	2.56	5×0.05	1.0	1.4	7.8×12.7	350.1	4.95	2/5	1400
	5×6	84/0.30	3.54	10×0.05	1.0	1.6	9.7×16.0	506.8	3.3	2/5	2100
	6×0.75	24/0.20	1.12	5×0.05	0.6	1.0	4.7×7.3	104.7	26	2/5	315
	6×1.0	32/0.20	1.29	5×0.05	0.6	1.1	5.1×7.9	127.2	19.5	2/5	420
	6×1.5	30/0.25	1.56	5×0.05	0.8	1.2	6.0×9.5	188.2	13.3	2/5	630
	6×2.5	49/0.25	2	5×0.05	0.9	1.4	7.0×11.1	278.7	7.98	2/5	1050
	6×4	56/0.30	2.56	5×0.05	1.0	1.5	8.1×13.0	413.0	4.95	2/5	1680
	6×6	84/0.30	3.54	10×0.05	1.0	1.7	9.9×16.2	591.9	3.3	2/5	2520
YZW (영문)	2×4	56/0.30	2.56	8×0.05	1.0	1.2	11.8	241.9	4.95	2/5	560
	2×6	84/0.30	3.54	10×0.05	1.0	1.3	13.6	397.9	3.3	2/5	840
	3×4	56/0.30	2.56	8×0.05	1.0	1.2	12.6	291.8	4.95	2/5	840
	3×6	84/0.30	3.54	10×0.05	1.0	1.3	14.4	452.6	3.3	2/5	1260
	4×4	56/0.30	2.56	8×0.05	1.0	1.2	14.0	363.9	4.95	2/5	1120
	4×6	84/0.30	3.54	10×0.05	1.0	1.3	16.0	552.5	3.3	2/5	1680
	5×4	56/0.30	2.56	8×0.05	1.0	1.4	15.5	444.8	4.95	2/5	1400
	5×6	84/0.30	3.54	10×0.05	1.0	1.6	17.8	670.6	3.3	2/5	2100
	6×0.75	24/0.20	1.12	8×0.05	0.6	1.0	9.5	142.6	26	2/5	315
	6×1.0	32/0.20	1.29	8×0.05	0.6	1.1	10.0	168.3	19.5	2/5	420
	6×1.5	30/0.25	1.56	8×0.05	0.8	1.2	12.3	251.8	13.3	2/5	630
	6×2.5	49/0.25	2	8×0.05	0.9	1.4	14.8	373.2	7.98	2/5	1050
	6×4	56/0.30	2.56	8×0.05	1.0	1.5	17.1	535.6	4.95	2/5	1680
	6×6	84/0.30	3.54	10×0.05	1.0	1.7	19.6	798.0	3.3	2/5	2520
	3×1.5+1×1.0	30/0.25 32/0.20	1.56 1.29	8×0.05 8×0.05	0.8 0.6	1.1	9	134.1	13.3	2/5	385
	3×2.5+1×1.5	49/0.25 30/0.25	2.00 1.56	8×0.05 8×0.05	0.9 0.8	1.2	10.7	195.2	7.98	2/5	630
	3×4+1×2.5	56/0.30 49/0.25	2.56 2.00	8×0.05 8×0.05	1.0 0.9	1.3	12.4	282.8	4.95	2/5	1015
	3×6+1×4	84/0.30 56/0.30	3.54 2.56	10×0.05 8×0.05	1.0 1.0	1.4	14.4	458.5	3.3	2/5	1540