KVVRP 제어 케이블

적용 범위

체계

This product is suitable for automatic control, monitoring circuits, protection circuits and other systems with power frequency AC rated voltage 0.45/0.75kV and below.

경우

야금술에 있는 조정 놓기, 전력, construction and other industries indoors and other occasions requiring shielding and good mobility

Product characteristics

This product has certain combustion resistance ，certain shielding performance and good mobility. The production raw materials are widely sourced and cheap, 가공 및 제조가 용이합니다..

Compliant standard

집행 기준

기가바이트/티 9330-2020 Plastic insulated control cable

Additional standard

Service characteristics

정격 볼륨tage

The power frequency AC rated voltage is 0.45/0.75kV, and the maximum voltage of the AC system should not exceed 1.0kV.

작동 온도

Cable conductor allows the highest working temperature 70 ℃ for a long time. ;During a short circuit, the maximum temperature of the cable conductor shall not exceed 160°C and the duration shall not exceed 5s.

사용 주위 온도

The ambient temperature of the cable should not be lower than -15 ° 씨.

누워 온도

The laying temperature of the cable should not be lower than 0℃.

굽힘 반경

The minimum bending radius should be no less than 6 케이블의 외경을 곱한 값.

Identification of product

Wire core

color spectrum：The preferred chromatogram for cables is two core’s cable, 크로마토그래피를 선호하지 않음。Three-core cable: yellow/green, 라이트 블루, 갈색, 또는 라이트 블루, 검정, 갈색. Four-core cable: yellow/green, 라이트 블루, 검정, 갈색, 또는 라이트 블루, 검정, 갈색, 검정 또는 갈색. Five-core cable: yellow/green, 라이트 블루, 검정, 갈색, 검정 또는 갈색, 또는 라이트 블루, 검정, 갈색, 검정 또는 갈색, 검정 또는 갈색, (Tip: Manufacturers can edit the color spectrum according to actual conditions)

digital identification: When the insulated core is marked with a number, Insulation should be of the same color and arranged numerically, except for yellow/green combination color insulated cores

Numbers apply Arabic numerals printed on the surface of the insulated core, The color of the numbers should be the same and clearly contrast with the insulation color and the writing should be clear,

The numerical designation shall be repeated at equal intervals along the insulated core Two adjacent sets of numerical signs should be reversed. When the flag consists of a single number, then you should put a dash below the number. If the flag consists of two numbers, then they should be arranged up and down and a dash should be placed under the following numbers. The distance between two adjacent sets of digital signs should not be greater than 50mm.

칼집

Cables shall be continuously identified with the manufacturer’s name, 제품 모델 및 정격 전압, The logo of factory’s name can be a duplicate of the manufacturer or repetitive identification.

The distance between the end of one complete sign and the beginning of the next sign The outer sheath of the cable should not exceed 550mm The cable insulation or tape should not exceed 275mm; The printed mark should be erasure resistant and not easy to fall off, and the printed content on the surface should be clear and recognizable

Delivery of goods and the length of the differences

Delivery of length

The length of the circle should be 100m, and the length of the disk should be greater than 100m. 24 cores and below : Short cable lengths of not less than 20 meters are allowed for delivery, The delivery length of the short section cable should not exceed 5% 총 배송 길이. 24 cores or more: Short cable lengths of not less than 20 meters are allowed for delivery, The delivery length of the short section cable should not exceed 10% 총 배송 길이. Or it can be delivered in any length according to mutual agreement

Error in length

The measurement error of delivery length should not exceed ±0.5%.

포장, transportation and storage

포장

1、Cable in rolls or coils is orderly winding and properly packed

2、The reel of cable shall comply with JB/T8137-2013,The end of cable should be reliably sealed, The cable ends extending out of the reel should be protected by a protective cover.

3、The package of cable should be attached with a label indicating: manufacturer name, 모델, 사양, 정격 전압, 길이, 질, 제조 날짜, 표준 번호 또는 인증 마크, correct rotation direction of the cable drum, 등.

transportation

Transportation generally takes the form of vehicles or ships. During transportation, the cables must be firmly fixed to avoid damage to the cables or disks due to collision or overturning.

storage

Finished cables should be stored in an environment with a temperature between 0 그리고 40 degrees Celsius and a humidity below 85%. They should not be exposed to direct sunlight or rain. They should be properly ventilated to keep the environment dry. Cables should be stored and used in accordance with the above regulations and can generally be used for more than 25 년.

Ordering matters

Necessary information of ordering such as cable model, 사양, 길이, packaging method, date of delivery, 등. should be correctly indicated.

예를 들어

Model of cable：KVVP-(R)-0.45/0.75kV

사양：24×1.5

길이：10000m

packaging method： Iron plate packaging

date of delivery：Validity period 일

Instructions of Installation

설치 중, the ambient temperature should not be lower than 0°C. 온도계로 측정한 주변 온도가 0°C 미만인 경우, the cable should be preheated before installation. The bending radius during cable laying should be strictly controlled

In order to avoid mechanical damage inside the cable。The yellow/green double-color insulated wire cores should be connected according to the designated positions.