Продукция

Aluminum-Clad Steel Wire Strand Conductor is a bimetallic wire which steel wire is covered by Aluminum evenly with advantages of good. electric conductivity, anti corrosion, good high frequency transmission and high intensity. Aluminum-coated steel core aluminum stranded wire is a stranded wire which strands Aluminum-Clad Steel wire as reinforce core with aluminum wire. It is widely used for electric transmission line conductors, especially for coastal areas, salt alkali beach, grade 3 or grade 4 polluted industrial zone and the place with requirement of enlarged Aluminum steel cross-section ratio.

AACSR Conductor is applied for large span overhead transmission and distribution lines than ACSR.

The aluminum conductor aluminum alloy reinforced(АКАР) is an excellent conductor choice where current carrying capacity, higher strength and a lower conductor weight are critical to the line design. The DC resistance of ACAR is smaller than ACSR, It is mainly used for electric distribution lines with little span, less stress. It has high current carrying capacity and better corrosion performance.

AAC has been widely used in power transmission lines with various voltage levels, Потому что они обладают такими хорошими характеристиками, как простое строение, Удобная установка и обслуживание, Низкая стоимость Большая пропускная способность , А еще они подходят для прокладки поперек рек, долин и мест, где существуют особые географические особенности. It is mainly used for electric distribution lines with little span, less stress. Temperature for continuous use is up to 75 ℃.

AAAC широко используется в линиях электропередачи с различными уровнями напряжения, Потому что они обладают такими хорошими характеристиками, как простое строение, Удобная установка и обслуживание, Низкая стоимость Большая пропускная способность. А еще они подходят для прокладки поперек рек, долин и мест, где существуют особые географические особенности. Используется в качестве неизолированного верхнего проводника для первичного и вторичного распределения. Разработан с использованием высокопрочного алюминиевого сплава для достижения высокого соотношения прочности к весу; Обеспечивает лучшие характеристики провисания. Алюминиевый сплав обладает более высокой устойчивостью к коррозии, чем ACSR.

ACSR Conductor is applied for large span overhead transmission and distribution lines. Temperature for continuous use can be up to 75 ℃.

Submarine power cable are used for interconnection of offshore power fields, tidal wave locale, wind mill and offshore oil&gas platforms and also islands. The voltage for such application are usually less than 26/35kV AC type and typically uses the three cores XLPE cables.

Submarine power cable are used for interconnection of offshore power fields, tidal wave locale, wind mill and offshore oil&gas platforms and also islands. The voltage for such application are usually less than 18/30kV AC type and typically uses three cores XLPE cables

Submarine power cable are used for interconnection of offshore power fields, tidal wave locale, wind mill and offshore oil&gas platforms and also islands. The voltage for such application are usually less than 12/20kV AC type and typically uses three cores XLPE cables.

Submarine power cable are used for interconnection of offshore power fields, tidal wave locale, wind mill and offshore oil&gas platforms and also islands. The voltage for such application are usually less than 8.7/15kV AC type and typically uses three cores XLPE cables.

Submarine power cable are used for interconnection of offshore power fields, tidal wave locale, wind mill and offshore oil&gas platforms and also islands. The voltage for such application are usually uses the single or three cores XLPE cables.

Submarine power cable are used for interconnection of offshore power fields, tidal wave locale, wind mill and offshore oil&gas platforms and also islands. The voltage for such application are usually uses the single or three cores XLPE cables

To be used for main power supply, In low voltage distribution power networks, industrial installations, in buildings and operation stations. fixed installation in the ground or in concrete, in the cable trenches or cable, ducts, indoor or outdoor areas, in dry or wet locations.

To be used for main power supply such as in low voltage distribution power networks， indoor and outdoor areas. It can be installed in ducts, in dry or wet locations, recommended for direct burial where require higher electrical and mechanical protection.

To be used for main power supply, In low voltage distribution power networks, industrial installations, in buildings and operation stations. fixed installation in the ground or in concrete, in the cable trenches or cable, ducts, indoor or outdoor areas, in dry or wet locations.

To be used for main power supply such as in low voltage distribution power networks， indoor and outdoor areas. It can be installed in ducts, in dry or wet locations, recommended for direct burial where require higher electrical and mechanical protection.